
Laser Paint Removal & Coating Stripping in Charlotte, NC
Laser paint removal ablates coatings layer by layer so you can strip a defined area, a single part or a repair zone without media blasting or chemical strippers.
How it works
What this service involves
Paint and industrial coatings absorb laser energy differently from the metal beneath them. With the right settings, the coating is vaporized or released while the substrate is left largely in place. Operators can work in passes, checking the surface as they go, which is useful when only a section has to be stripped.
How well it works depends heavily on coating chemistry, color, thickness and the number of layers. A thin single-coat paint behaves very differently from a multi-layer epoxy system or a thick powder coating, so Vulcan evaluates the actual coating before quoting.

Based in Charlotte, NC
Paint & Coating Removal in Charlotte
In Charlotte we are most often asked to strip coatings from fabricated parts and machinery at local shops, and from railings, gates and architectural metal on commercial and older residential properties. Photos and a test area tell us whether the coating is a good fit for laser stripping.
Neighboring towns are covered too. See all service areas.
Applications
Where it is used
Machinery refurbishment
Removing failed paint from housings, bases and covers before inspection and recoating.
Fabricated parts
Stripping coating from weld zones, mounting faces and contact surfaces.
Localized stripping
Clearing a defined patch for repair, welding or inspection while leaving the rest of the finish alone.
Metal restoration
Taking old coatings off steel components, railings and hardware where detail should be preserved.
Tooling and fixtures
Cleaning overspray and old finish from jigs and fixtures.
Benefits
Why it can help
- Selective removal limited to the area you choose
- No chemical strippers to apply, neutralize or dispose of
- No blast media embedded in the surface or scattered around the site
- Operators can inspect the surface between passes
Limitations to know about
- Thick, multi-layer or highly reflective coatings can be slow or poorly suited to laser removal.
- Coatings that may contain lead, chromium or other hazardous materials require special containment, extraction and handling before work is considered.
- Large flat surfaces such as storage tanks or hulls are often better handled by other methods.
- Underlying thin or heat-sensitive materials need testing, and results cannot be promised without it.
Results depend on the substrate, contaminant, equipment, process settings and testing.
Related
Related services
Rust & Corrosion Removal
Lift oxidized metal from steel and iron without blasting media.
Metal Surface Preparation
Clean metal before painting, coating, bonding or inspection.
Industrial Equipment Cleaning
Selective cleaning for machinery, components and production parts.
Based in Charlotte, NC and serving the surrounding Carolinas. See where we work.
Ready to discuss paint & coating removal?
Send the material, size, what needs to come off and where the project is. We will review suitability and tell you what we recommend.